Re: Asus ir 3G arba 4G internetas. Tomui J. Q [klaustukas @ 2009-12-18 10:51:59]

Tema: Re: Asus ir 3G arba 4G internetas. Tomui J. Q
Autorius: klaustukas
Data: 2009-12-18 10:51:59
Padariau pagal tavo instrukcija, gaunu tokia info:
(none) login: admin
Password:
[admin@(none) root]$ tail -f /usr/tmp/syslog.log
Jan  1 00:00:17 kernel: sda: Write Protect is on
Jan  1 00:00:17 kernel:  /dev/scsi/host0/bus0/target0/lun0: I/O error: dev 
08:00
, sector 0
Jan  1 00:00:17 kernel:  I/O error: dev 08:00, sector 0
Jan  1 00:00:17 kernel:  unable to read partition table
Jan  1 00:00:17 kernel:  I/O error: dev 08:00, sector 0
Jan  1 00:01:16 dnsmasq-dhcp[67]: DHCPDISCOVER(br0) 00:c0:a8:c4:a7:0a
Jan  1 00:01:16 dnsmasq-dhcp[67]: DHCPOFFER(br0) 192.168.1.170 
00:c0:a8:c4:a7:0a

Jan  1 00:01:16 dnsmasq-dhcp[67]: DHCPREQUEST(br0) 192.168.1.170 
00:c0:a8:c4:a7:
0a
Jan  1 00:01:16 dnsmasq-dhcp[67]: DHCPACK(br0) 192.168.1.170 
00:c0:a8:c4:a7:0a G
ervydas
Jan  1 00:01:43 login[117]: root login on 'pts/0'
Jan  1 00:02:32 kernel: usb.c: USB disconnect on device 00:03.1-1 address 2
Jan  1 00:02:32 kernel: USB device disconnected from the SCSI subsystem
Jan  1 00:02:39 kernel: hub.c: new USB device 00:03.1-1, assigned address 3
Jan  1 00:02:40 kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan  1 00:02:40 kernel:   Vendor: ZTE       Model: USB SCSI CD-ROM   Rev: 
2.31
Jan  1 00:02:40 kernel:   Type:   CD-ROM                             ANSI 
SCSI r
evision: 02
Jan  1 00:02:47 kernel: hub.c: already running port 1 disabled by hub 
(EMI?), re
-enabling...
Jan  1 00:02:47 kernel: usb.c: USB disconnect on device 00:03.1-1 address 3
Jan  1 00:02:47 kernel: USB device disconnected from the SCSI subsystem
Jan  1 00:02:47 kernel: hub.c: new USB device 00:03.1-1, assigned address 4
Jan  1 00:02:48 kernel: usb.c: error getting string descriptor 0 (error=-71)
Jan  1 00:02:48 kernel: usb.c: error getting string descriptor 0 (error=-71)
Jan  1 00:02:48 kernel: usb.c: error getting string descriptor 0 (error=-71)
Jan  1 00:02:48 kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Jan  1 00:02:48 kernel: hub.c: already running port 1 disabled by hub 
(EMI?), re
-enabling...
Jan  1 00:02:48 kernel: usb.c: USB disconnect on device 00:03.1-1 address 4
Jan  1 00:02:48 kernel: Unable to disconnect USB device from the SCSI 
subsystem
Jan  1 00:02:49 kernel: hub.c: new USB device 00:03.1-1, assigned address 5
Jan  1 00:02:49 kernel: usb.c: USB device not accepting new address=5 
(error=-71
)
Jan  1 00:02:49 kernel: hub.c: new USB device 00:03.1-1, assigned address 6
Jan  1 00:02:50 kernel: usb.c: error getting string descriptor 0 (error=-71)
Jan  1 00:02:50 kernel: usb.c: error getting string descriptor 0 (error=-71)
Jan  1 00:02:50 kernel: usb.c: error getting string descriptor 0 (error=-71)
Jan  1 00:02:50 kernel: USB device connected to the SCSI subsystem
Jan  1 00:02:50 kernel: hub.c: already running port 1 disabled by hub 
(EMI?), re
-enabling...
Jan  1 00:02:50 kernel: usb.c: USB disconnect on device 00:03.1-1 address 6
Jan  1 00:02:50 kernel: Unable to disconnect USB device from the SCSI 
subsystem
Jan  1 00:02:51 kernel: hub.c: new USB device 00:03.1-1, assigned address 7
Jan  1 00:02:51 kernel: usb.c: USB device not accepting new address=7 
(error=-71
)
Jan  1 00:02:51 kernel: hub.c: new USB device 00:03.1-1, assigned address 8
Jan  1 00:02:51 kernel: usb.c: USB device not accepting new address=8 
(error=-71
)
Jan  1 00:05:34 kernel: hub.c: new USB device 00:03.1-1, assigned address 9

"Tomas J." <tomas@novena.lt> wrote in message 
news:hgdv54$kei$1@trimpas.omnitel.net...
> as darau pilna reseta, nauja firmware dedu ir tada configa keiciu.
>
> "klaustukas" <omni@me.net> wrote in message 
> news:hgdhsk$5g3$1@trimpas.omnitel.net...
>> Aciu, pabandysiu, o esamos konfiguracijos nereikia pasalinti? Jei taip, 
>> kokiu budu tai padaryti?
>>
>> Zilvis
>> "Tomas J." <tomas@novena.lt> wrote in message 
>> news:hgdfkk$276$1@trimpas.omnitel.net...
>>> Pabandyk
>>>
>>> uzeiname i dir-320:
>>> telnet 192.168.1.1 (login: admin, passwd: admin)
>>> sukuriame papke peers
>>>
>>> mkdir /tmp/ppp/peers
>>> paleidziame vidini redaktoriu1. vi
>>> ir paspaude raide i ikopijuojame (Copy/Paste) vat tai:
>>> debug
>>> /dev/usb/tts/0
>>> 921600
>>> mtu 1400
>>> mru 1400
>>> crtscts
>>> noipdefault
>>> ipcp-accept-local
>>> lcp-echo-interval 60
>>> lcp-echo-failure 5
>>> usepeerdns
>>> noauth
>>> nodetach
>>> user 'omni'
>>> password 'omni'
>>> connect "/usr/sbin/chat -s -S -V -t 60 -f /tmp/ppp/dialup.chat 
>>> 2>/tmp/chat.log"
>>> Spaudziame ESC ir issaugome::w /tmp/ppp/peers/dialup
>>> Iseiname is redaktoriaus
>>> :q
>>>
>>> Vel paleidziame redaktoriu
>>> 2. vi
>>> '' ''
>>> '' 'ATZ'
>>> '' 'AT+CFUN=1'
>>> '' 'AT+CGDCONT=1,IP,omnitel'
>>> 'OK' 'ATD *99#'
>>> 'CONNECT' ''
>>> Vel ESC ir issaugome
>>> :w /tmp/ppp/dialup.chat
>>> :q
>>>
>>>
>>>
>>> 4. Sukuriame dar viena papke:
>>> mkdir /tmp/local/sbin
>>>
>>> 5. Velgi paleidziame redaktoriu ir i ji ikopijuojame vat tai:
>>>
>>> #! /bin/sh
>>> rmmod printer
>>> insmod usbserial vendor=0x19d2 product=0x0015 maxSize=4096 <- cia savo 
>>> yrasai vendor produkt
>>> DEVICE=1
>>> while true; do
>>> sleep 5
>>> if [ -e /dev/usb/tts/${DEVICE} ]; then
>>> echo 'modem found. call dialup'
>>> mpcs -c /tmp/local &
>>> sleep 2
>>> pppd call dialup
>>> killall -15 pppd
>>> rmmod usb-ohci; sleep 2
>>> insmod usb-ohci; sleep 2
>>> else
>>> fi
>>> done
>>> Spaudziame ESC ir issaugome:
>>>
>>> :w /tmp/local/sbin/post-boot
>>> :q
>>>
>>> 6. Velgi paleidziame redaktoriu ir i ji ikopijuojame vat tai:
>>>
>>> #! /bin/sh
>>> rmmod printer
>>> insmod usbserial vendor=0x19d2 product=0x0015 maxSize=4096 <- cia savo 
>>> irasai vendor produkt
>>> DEVICE=1
>>> while true; do
>>> sleep 5
>>> if [ -e /dev/usb/tts/${DEVICE} ]; then
>>> echo 'modem found. call dialup'
>>> mpcs -c /tmp/local &
>>> sleep 2
>>> pppd call dialup
>>> killall -15 pppd
>>> rmmod usb-ohci; sleep 2
>>> insmod usb-ohci; sleep 2
>>> else
>>> fi
>>> done
>>> Spaudziame ESC ir issaugome:
>>>
>>> :w /tmp/local/sbin/post-mount
>>> :q
>>>
>>> 7. Sukuriame linkus i ka tik sukurtus failiukus
>>>
>>> echo /tmp/ppp/peers/dialup > /tmp/local/.files
>>> echo /tmp/ppp/dialup.chat >> /tmp/local/.files
>>> echo /tmp/ppp//tmp/local/sbin/post-mount >> /tmp/local/.files
>>> echo /tmp/ppp//tmp/local/sbin/post-boot >> /tmp/local/.files
>>>
>>> 8. Suteikiame ka tik sukurtam skriptui paleidimo teises:
>>> chmod +x /tmp/local/sbin/post-boot
>>>
>>> 9. Issaugome visa atlikta darba ir perkrauname DIR'a:
>>> flashfs save && flashfs commit && flashfs enable
>>> reboot
>>>
>>>
>>>
>>>
>>> "klaustukas" <omni@me.net> wrote in message 
>>> news:hgdelb$ll$1@trimpas.omnitel.net...
>>>> As naudojau WL500gpv2-1.9.2.7-d-r627M.trx
>>>> ir dariau toki konfiga:
>>>>
>>>> telnet 192.168.1.1 (login: admin, passwd: admin)
>>>>
>>>> Sukuriame reikiamus katalogus:
>>>> mkdir /tmp/local/sbin
>>>> mkdir /tmp/ppp/peers
>>>>
>>>> 3. Sukuriame reikiamus failus:
>>>>
>>>> vi /etc/usb_modeswitch.conf
>>>>
>>>> CheckSuccess=2
>>>>
>>>> # ZTE MF633
>>>>
>>>> #
>>>>
>>>> # Contributor: Joakim Wennergren
>>>>
>>>>
>>>>
>>>> DefaultVendor=  0x19d2
>>>>
>>>> DefaultProduct= 0x2000
>>>>
>>>>
>>>>
>>>> TargetVendor=   0x19d2
>>>>
>>>> TargetProduct=  0x0031
>>>>
>>>>
>>>>
>>>> MessageEndpoint=0x01
>>>>
>>>>
>>>>
>>>> MessageContent="55534243123456782000000080000c85010101180101010101000000000000"
>>>>
>>>>
>>>>
>>>> # if that command doesn't work, try the other ("eject")
>>>>
>>>> MessageContent="5553424312345678000000000000061b000000030000000000000000000000"
>>>>
>>>> vi /tmp/local/sbin/post-boot
>>>>
>>>> #!/bin/sh
>>>> chmod 777 /tmp
>>>> usb_modeswitch
>>>> sleep 5
>>>> rmmod usbserial
>>>> sleep 5
>>>> s=0
>>>> DEVICE=2
>>>> insmod usbserial vendor=0x19d2 product=0x0031 maxSize=4096
>>>> sleep 10
>>>> while true; do
>>>> if [ -e /dev/usb/tts/${DEVICE} ]; then
>>>> echo 'modem on'
>>>> /tmp/local/sbin/post-pppd start &
>>>> sleep 20
>>>> s=0
>>>> else
>>>> echo 'modem off'
>>>> fi
>>>> while [ -e /dev/usb/tts/${DEVICE} ]; do
>>>> if [ -n "`pidof pppd`" ]
>>>> then
>>>> sleep 30
>>>> else
>>>> break #end while
>>>> echo "pppd down"
>>>> fi
>>>> done
>>>> echo ''
>>>> if [ $s = 0 ]; then
>>>> killall pppd
>>>> killall -SIGHUP pppd
>>>> killall /dev/usb/tts/*
>>>> killall chat
>>>> killall cat
>>>> s=1
>>>> else
>>>> sleep 30
>>>> fi
>>>> done
>>>>
>>>> vi /tmp/local/sbin/post-pppd
>>>>
>>>> #! /bin/sh
>>>> sleep 10
>>>> pppd call dialup
>>>> sleep 60
>>>> cat /dev/usb/tts/1 &
>>>>
>>>> vi /tmp/ppp/peers/dialup
>>>>
>>>> debug
>>>> /dev/usb/tts/2
>>>> 921600
>>>> mtu 1400
>>>> mru 1400
>>>> crtscts
>>>> noipdefault
>>>> ipcp-accept-local
>>>> ipcp-accept-remote
>>>> lcp-echo-interval 180
>>>> lcp-echo-failure 3
>>>> mppc
>>>> maxfail 1
>>>> usepeerdns
>>>> defaultroute
>>>> noauth
>>>> persist
>>>> holdoff 10
>>>> user ''
>>>> password ''
>>>> connect "/usr/sbin/chat -s -S -V -t 60 -f /tmp/ppp/dialup.chat 
>>>> 2>/tmp/chat.log"
>>>>
>>>> vi /tmp/ppp/dialup.chat
>>>>
>>>> '' ''
>>>> '' 'ATZ'
>>>> '' 'AT+CFUN=1'
>>>> '' 'ATQ0 V1 E1 S0=0 &C1 &D0 +FCLASS=0'
>>>> '' 'AT+ZSNT=0,0,1'
>>>> '' 'AT+ZOPRT=5'
>>>> '' 'AT+ZSTART'
>>>> '' 'AT+CPBS="SM"'
>>>> '' 'AT+CPMS="SM","SM",""'
>>>> '' 'AT+CGDCONT=1,"IP","omnitel"'
>>>> 'OK' 'ATD *99#'
>>>> 'CONNECT' ''
>>>>
>>>> 4. Viska issaugom su funkcijom:
>>>> echo /tmp/ppp/peers/dialup > /tmp/local/.files
>>>> echo /tmp/ppp/dialup.chat >> /tmp/local/.files
>>>> echo /etc/usb_modeswitch.conf >> /tmp/local/.files
>>>> chmod +x /tmp/local/sbin/post-boot
>>>> chmod +x /tmp/local/sbin/post-pppd
>>>> flashfs save && flashfs commit && flashfs enable && reboot
>>>>
>>>> "Tomas J." <tomas@novena.lt> wrote in message 
>>>> news:hgcvjh$7p3$1@trimpas.omnitel.net...
>>>>> Viskas gerai, as truputi skriptus pakeiciau nei standartiniai, 
>>>>> pasileidzia omni connectas tiek isjungus ijungus dlinka, tiek 
>>>>> istraukus ir atgal ikisus modema.
>>>>>
>>>>> "klaustukas" <omni@me.net> wrote in message 
>>>>> news:hgcojq$s84$1@trimpas.omnitel.net...
>>>>>> Tomai, tureciau tau klausima: kaip tau startuoja 3G po isjungimo is 
>>>>>> el. tinklo? Nes pas mane kaipo ir veikia bet jei isjungiu dlink'a is 
>>>>>> rozetes ir vel ijungiu per telnet matau usb device error'a po keliu 
>>>>>> software'iniu restartu- pasileidzia.. Butu kokiu minciu? Aciu.
>>>>>>
>>>>>> Zilvis
>>>>>>
>>>>>> "Tomas J." <tomas@novena.lt> wrote in message 
>>>>>> news:hgclkm$nnb$1@trimpas.omnitel.net...
>>>>>>> Kaip cia pasakius apie ju darba, pvz. dlinko DIR-320 firmwaras su 3G 
>>>>>>> labai nepatiko, stabilumo nulis, perrasius asuso firmwara i ji ir 
>>>>>>> paburus truputuka dirba stabiliai.
>>>>>>>
>>>>>>> "Yksas" <karosas_istrinti@gmail.com> wrote in message 
>>>>>>> news:hgb3cq$lsh$1@trimpas.omnitel.net...
>>>>>>>> rasiau, kad pradziai reiktu su 3G, o uz metu kokiu su 4G
>>>>>>>> Taip kad per metus tiktai tuos draiverius parasys entziastai :)
>>>>>>>> Dabar idomiausia, ar dirba jis su 3G modemais?
>>>>>>>> Nes skaiciau, kad nauji routeriai jau defolt dirba su 3G modemais 
>>>>>>>> naudodami gimtaja firmware
>>>>>>>>
>>>>>>>>
>>>>>>>> "RolF2" <123@123.123> wrote in message news:hg92cf$hqf$1@trimpas.om 
>>>>>>>> nitel.net...
>>>>>>>>> RT-N16 sukasi 2.6 kernelis linuxo , ant wl500 - 2.4 . jei sugebesi 
>>>>>>>>> susikompilint driverius mezono jam - kodel gi ne :)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> "Yksas" <karosas_istrinti@gmail.com> wrote in message 
>>>>>>>>> news:hg8j8q$2j9$1@trimpas.omnitel.net...
>>>>>>>>>> Noriu pradziai per Asus routeri pasileistiOmni Connect(3g), 
>>>>>>>>>> veliau MEZON (4G)
>>>>>>>>>>
>>>>>>>>>> http://mezon.projektas.lt/ raso, kad tinka  WL-500gp, WL-500gpv2 
>>>>>>>>>> arba WL-500W
>>>>>>>>>> Atsirades yra modelis Asus RT-N16. Ar kazkas susidure  su siuo 
>>>>>>>>>> routeriu, ar iseina ji perdirbti?
>>>>>>>>>> Ar galesiu ji pamaitinti 3g ir 4g internetu, kad jis man per 
>>>>>>>>>> WI-FI interneta skleistu po visa nama?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>>
>
>