Išėjusią naują  EOS 5D MarkII Firmware 2.0.3

Jau galima paarsisiusti : 
http://web.canon.jp/imaging/eosd/firm-e/eos5dmk2/firmware.html

What has changed in Firmware Version 2.0.3?

Firmware Version 2.0.3 incorporates five enhancements to the movie function 
and a fix to the manual sensor cleaning function of the EOS 5D Mark II 
camera.

  1.. Adds or changes the following movie frame rates.


      NTSC
     Firmware Version 2.0.3
      frame rate (fps)
     Firmware Version 1.2.4 or earlier
      frame rate (fps)

      Recording size
     Listed
     Actual
     Listed
     Actual

      1920×1080
     30
     29.97
     30
     30.00

      1920×1080
     24
     23.976
     -
     -

      640×480
     30
     29.97
     30
     30.00





      PAL
     Firmware Version 2.0.3
      frame rate (fps)
     Firmware Version 1.2.4 or earlier
      frame rate (fps)

      Recording size
     Listed
     Actual
     Listed
     Actual

      1920×1080
     25
     25.00
     30
     30.00

      1920×1080
     24
     23.976
     -
     -

      640×480
     25
     25.00
     30
     30.00



  2.. Adds a function for manually adjusting the sound recording level (64 
levels).
  3.. Adds a histogram display (brightness or RGB) for shooting movies in 
manual exposure.
  4.. Adds shutter-priority AE mode (Tv) and aperture-priority AE (Av) mode 
to the exposure modes for shooting movies.
  5.. Changes the audio sampling frequency from 44.1 KHz to 48 KHz.
  6.. Fixes a phenomenon where communication between the camera and the 
attached lens is sometimes interrupted after manual sensor cleaning. (This 
phenomenon only affects units with Firmware Version 1.2.4.)


Are the previous versions of firmware included in version 2.0.3?

Yes, the following improvements from the previous versions are included:

(Previous) Version 1.2.4 improvements:

Firmware Version 1.2.4 includes the following improvements and fixes:

  1.. Supports the WFT-E4 II wireless file transmitter that was released in 
December 2009.
After the firmware is updated, if the WFT-E4 or WFT-E4 II wireless file 
transmitter is used with the camera, the indications that appear under 
[Communication mode] on the [WFT settings] menu are changed as follows:

    a.. FTP -> FTP trans
    b.. PTP(PC) -> EOSUtility
    c.. HTTP -> WFTserver
    d.. HTTP account -> WFT account
  2.. Corrects a phenomenon in which visible noise may appear in images 
taken by continuous Bulb shooting.
This firmware update corrects a phenomenon that if the [C.Fn II-1 Long 
exposure noise reduction] setting is set to [2: On], noise may appear in 
images that are captured while the previous image is still being generated.