Aciu

"Serg" <pokemonu@gmail.com> wrote in message 
news:iqc7lf$c19$1@trimpas.omnitel.net...
> Getting to uboot / recovery flash mode:
> 0) unplug your router
> 1) Press in and hold your reset button and do NOT release
> 2) While holding the reset button, plug the power back into your router 
> and continue to hold the reset button
> 3) The status light will come on and hold and eventually it will start 
> blinking ever 1/2 - 1 second. Once it starts to repeatedly flash, release 
> the reset button and connect an ethernet cord to your PC (if you haven't 
> already).
> 4) Go into your PC's network settings and assign yourself the private IP 
> of 192.168.0.2
> 5) The router is now in recover mode and is listening to HTTP request on 
> 192.168.0.1
> 6) Open up Internet explorer (or Firefox, just make sure you clear your 
> caches in both) and navigate to 192.168.0.1
> 7) You are now in the recovery flash GUI
>
> P.S.: Jei trumpai, jungiam routeri i rozete laikidami reset mygtuka. 
> Kazkiek sekundziu laukiam, kol neprades kitaip mirgset. Su salyga kad 
> kompiuteryje nustatytas 192.168.0.2 ar koks nors kitas is sio potinklio 
> tik ne 0.1 bandam su internetine narsykle atidaryti http://192.168.0.1 - 
> turim pamatyti Recovery Mode puslapi, per ji ir kraunam originalu 
> firmware.
>
> On 05/10/11 23:10, 499 wrote:
>> Kaip is dd-wrt gryzti atgal i dlink firmwara? Per dd-wrt web interfeisa
>> pakisus *.bin'a, ismeta pransima, kad flashinimas failed, nieko
>> neivyksta. Help :)
>>
>>
>> "NicMC" <jzs@freemail.lt> wrote in message
>> news:iqah1q$u3r$1@trimpas.omnitel.net...
>>> On 2011.05.09 22:03, Serg wrote:
>>>> Turetu tikti. Del multicasto ant DIR-615 man atrodo jau buvo cia
>>>> threadu.
>>>
>>> Garantuotai veikia B2 rev. 2.26 fw
>>
>