nu ir? Darenas "YZF" <yzfas_@_centras.lt> wrote in message news:g98rot$bmp$1@trimpas.omnitel.net... > AHCI stand for Advance Host Controller Interface. AHCI is a hardware > mechanism that allows software to communicate with Serial ATA (SATA) devices > (such as host bus adapters) that are designed to offer features not offered > by Parallel ATA (PATA) controllers, such as hot-plugging and native command > queuing (NCQ). > > > > "Darenas" <klausk@jeireikia.com> wrote in message > news:g98lfc$l7$1@trimpas.omnitel.net... >> Cia tiems kas nores pasileisti ACHI. >> Sorry tingejau versti :))) >> >> A very simple way to change BIOS from IDE to AHCI without new >> XP-Installation and it works! >> 1- Go to hardware manager, click on “Intel(R)…ATA- Storage controller” >> that you are using with IDE and with a right maus click, driver update. >> Look for and load the right AHCI driver for your chipset. >> Turn off XP and go to Bios set-up wenn re-booting, change Bios to AHCI. >> Re-boot. >> XP will start, recognize new Hardware and akst to re-boot. Just do it. >> XP boot normally. Done. It worked for me, but do it on your own risk. >> After doing it, I was wondering why experts doesn’t suggest it. Maybe to >> sell floppy drivers? >> >> Kartoju citata: >> "do it on your own risk" :) >> >> Darenas >> >> >> >> "Darenas" <klausk@jeireikia.com> wrote in message >> news:g98knu$v1g$1@trimpas.omnitel.net... >>> http://expertester.wordpress.com/2008/07/24/ahci-vs-ide-%E2%80%93-benchmark-advantage/ >>> >>> >>> "YZF" <yzfas_@_centras.lt> wrote in message >>> news:g98im3$red$1@trimpas.omnitel.net... >>>> del USB priedu pajunginejimo ACHI geriau, ne? >>>> >>>> "Darenas" <klausk@jeireikia.com> wrote in message >>>> news:g98hrf$q0l$1@trimpas.omnitel.net... >>>>> Kas ka naudojat? Man pavyko be reinstalo paleisti ACHI mode HDD. >>>>> >>>>> Perfomanco padidejimo kaip ir nepajauciau, reikejo su programom >>>>> testuoti >>>>> pries ir po. >>>>> >>>>> Darenas >>>> >>>> > >