o kai atidarysiu signalizacijos dėžutę vidinė sirena kauks? 


"RamuX" <ramunas @ ramunas.lt> wrote in message news:igh041$c98$1@trimpas.omnitel.net...
> To default the main control panel (hardware), perform the following:
> 1. Remove AC and battery from the panel.
> 2. Remove all wires from the Zone 1 and PGM1 terminals.
> 3. With a piece of wire short the Zone 1 terminal to the PGM1
> terminal.
> 4. Apply AC power to the main panel.
> 5. When Zone Light 1 is lit on the keypad the default is complete.
> 6. Remove AC power from the control
> 7. Reconnect all original wiring and power up the control.
> 
> The Installer’s Code is [5555] by default