Dekui, va dar ka radau, but juoko jei pades... Corsa-D, Astra-H, Zafira-B and Insignia with tyre pressure control system The tyre pressure monitoring system is a combination of direct and indirect measuring. Unlike the system in the Signum / Vectra-C it only has one receiver / control unit. For this reason the system has to be "taught" to recognise the positions of the tyres. Wheels that are removed as part of the pre-delivery inspection or because of defects during transport must be replaced in the same positions to avoid the need for a reset. The system "learns" as follows: Press the reset button for 4 seconds with the ignition ON or with the engine running and then drive approximately 10 min / 6 mls (10 km) (the driver, not the dealer!). During this time the system teaches itself. Note: