Sveiki,

Isistaciau as vakar i savo Debian Etch nauja WD 1TB diska. Kraunantis 
sistemai loguose pamaciau viena eilute, kuri mane truputi neramina. O 
tiksliau:

--------------
May 23 19:54:39 omega kernel: ICH5: chipset revision 2
May 23 19:54:39 omega kernel: ICH5: not 100% native mode: will probe 
irqs later
May 23 19:54:39 omega kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS 
settings: hda:DMA, hdb:DMA
May 23 19:54:39 omega kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS 
settings: hdc:pio, hdd:pio
May 23 19:54:39 omega kernel: hda: Maxtor 6Y080L0, ATA DISK drive
May 23 19:54:39 omega kernel: hdb: LITE-ON DVDRW SHM-165P6S, ATAPI 
CD/DVD-ROM drive
May 23 19:54:39 omega kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
May 23 19:54:39 omega kernel: ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
May 23 19:54:39 omega kernel: ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 
18 (level, low) -> IRQ 18
May 23 19:54:39 omega kernel: ata1: SATA max UDMA/133 cmd 0xC400 ctl 
0xC802 bmdma 0xD400 irq 18
May 23 19:54:39 omega kernel: ata2: SATA max UDMA/133 cmd 0xCC00 ctl 
0xD002 bmdma 0xD408 irq 18
May 23 19:54:39 omega kernel: scsi0 : ata_piix
May 23 19:54:39 omega kernel: ata1.00: ATA-8, max UDMA/133, 65134 
sectors: LBA48 NCQ (depth 0/32)
May 23 19:54:39 omega kernel: ata1.00: ata1: dev 0 multi count 16
May 23 19:54:39 omega kernel: ata1.00: configured for UDMA/133
May 23 19:54:39 omega kernel: scsi1 : ata_piix
May 23 19:54:39 omega kernel: ATA: abnormal status 0x7F on port 0xCC07
May 23 19:54:39 omega kernel: Vendor: ATA       Model: WDC WD10EACS-00Z 
  Rev: 01.0
May 23 19:54:39 omega kernel: Type:   Direct-Access 
  ANSI SCSI revision: 05

-------------

Cia ta eilute su abnormal status. Kaip i toki pranesima reaguoti? Kaip 
ji gydyti?  Kol kas jokiu papildomu blogu pranesimu veikiant sistemai 
nepastebejau, bet truputi baisoka. Dekui.